Load data for 9 mm Steyr (Roth) + .356 | 120gr | H&N RN F

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.356 \| 120gr \| H&N RN F
Bullet Weight:	120gr \| 7.8g
Bullet Diameter:	0.356" \| 9.04mm
Bullet Length:	<<locked>>
Caliber:	9 mm Steyr (Roth) load data
Case Length (l3):	0.913" \| 23.2mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	17.4 Grains of Water \| 1.13 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B7442_C1226
Last updated:	2026-02-10

Load data for 42 loads in caliber 9 mm Steyr (Roth) with .356 | 120gr | H&N RN F bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	82%	17448	89%	**09	82%
Accurate Solo 1250	<<locked>>	66%	17434	89%	**66	100%
Alliant BE-86	<<locked>>	65%	17463	89%	**66	100%
Alliant Herco	<<locked>>	79%	17187	88%	**02	97%
Alliant UNIQUE	<<locked>>	67%	17521	89%	**12	97%
Baschieri & Pellagri 102 Pistol	<<locked>>	79%	17056	87%	**47	100%
Hodgdon CFE Pistol	<<locked>>	62%	17172	88%	**70	100%
Hodgdon TrailBoss	<<locked>>	97%	10588	54%	**3	100%
Maxam CSB 1	<<locked>>	67%	17100	87%	**56	100%
Maxam CSB 2	<<locked>>	68%	17318	88%	**96	100%
ReloadSwiss RS 20 👍	<<locked>>	70%	17492	89%	**32	99%
[Rottweil P 806]*	<<locked>>	84%	17289	88%	**24	89%
SNPE Vectan A0	<<locked>>	67%	17405	89%	**63	97%
[SNPE Vectan BA7 1/2]*	<<locked>>	74%	17318	88%	**86	89%
[SNPE Vectan SP 2]*	<<locked>>	68%	17390	89%	**75	84%
Somchem MS200	<<locked>>	64%	17550	90%	**86	98%
Vihtavuori 3N37	<<locked>>	70%	17564	90%	**29	91%
Vihtavuori N32C Tin Star	<<locked>>	81%	17289	88%	**1	100%
Vihtavuori N330	<<locked>>	63%	17071	87%	**89	100%
Vihtavuori N340	<<locked>>	66%	17521	89%	**93	97%
Vihtavuori N350	<<locked>>	73%	17114	87%	**15	91%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 100]*	<<locked>>	78%	15693	80%	**66	80%
Accurate Solo 1250	<<locked>>	61%	15113	77%	**14	99%
Alliant BE-86	<<locked>>	60%	15011	77%	**14	100%
[Alliant Herco]*	<<locked>>	60%	10095	52%	**9	88%
Alliant UNIQUE	<<locked>>	61%	14533	74%	**33	94%
Baschieri & Pellagri 102 Pistol	<<locked>>	60%	9689	49%	**3	100%
Hodgdon CFE Pistol	<<locked>>	60%	16056	82%	**43	99%
Hodgdon TrailBoss	<<locked>>	93%	9790	50%	**0	100%
Maxam CSB 1	<<locked>>	62%	14460	74%	**4	99%
Maxam CSB 2	<<locked>>	60%	13460	69%	**04	100%
ReloadSwiss RS 20	<<locked>>	60%	12749	65%	**04	95%
[Rottweil P 806]*	<<locked>>	73%	11676	60%	**53	81%
SNPE Vectan A0	<<locked>>	61%	14460	74%	**1	94%
[SNPE Vectan BA7 1/2]*	<<locked>>	60%	11502	59%	**9	81%
[SNPE Vectan SP 2]*	<<locked>>	63%	14736	75%	**02	81%
Somchem MS200	<<locked>>	62%	16578	85%	**60	97%
[Vihtavuori 3N37]*	<<locked>>	61%	12763	65%	**1	84%
Vihtavuori N32C Tin Star	<<locked>>	61%	9921	51%	**0	100%
Vihtavuori N330	<<locked>>	60%	15374	79%	**53	100%
Vihtavuori N340	<<locked>>	61%	14852	76%	**27	95%
[Vihtavuori N350]*	<<locked>>	61%	11676	60%	**8	83%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data